Cisco 300-430 Exam Dumps

Cisco 300-430 Sample Question Answers

Question # 1

An engineer needs read/write access to rename access points and add them to the correct AP groups on a wireless controller. Using Cisco ISE TACACS, which custom attributes is the minimum required?

A. role1=WLAN 
B. role1=WLAN role2=SECURITY
C. role1=WLAN role2=WIRELESS
D. role1=WIRELESS

Show Answer

Question # 2

A network engineer is implementing a wireless network and is considering deploying a single SSID for device onboarding. Which option is a benefit of using dual SSIDs with a captive portal on the onboard SSID compared to a single SSID solution?

A. limit of a single device per user
B. restrict allowed devices types
C. allow multiple devices per user
D. minimize client configuration errors 

Show Answer

Question # 3

An enterprise has two WLANs configured on WLC. It is reported that when converting APs to FlexConnect mode, WLAN A works but WLAN B does not. When converting APs to local mode, WLAN B works, but WLAN A does not. Which action is needed to complete this configuration?

A. Create a Cisco FlexConnect group with WLAN-VLAN mapping. 
B. Disable local switching on the WLANs. 
C. Map the AP group to the WLAN interface. 
D. Join the APs to a Cisco FlexConnect group. 

Show Answer

Question # 4

A wireless administrator receives this information to complete a CMX deployment in high availability by using version 10.6 to gather analytics. IP address of the primary server IP address of the secondary server failover mode to be configured as automatic root password of the secondary server email ID for NOC notifications Enabling high availability fails when these parameters are used. Which action resolves the issue?

A. Insert the cmxadmin password of the secondary server
B. Use IP protocol 4242 for the controller to reach the CMX server.
C. Place primary and secondary servers in different subnets. 
D. Enable the virtual IP address of the primary server. 

Show Answer

Question # 5

An engineer is deploying a virtual MSE. The network has 3000 APs and needs 7000 IPSlicenses To which size server does the engineer scale it?

A. virtual 
B. standard
C. high end 
D. low end 

Show Answer

Question # 6

An engineer is adding APs to an existing VolMLAN to allow for location based services. Which option will the primary change be to the network?

A. increased transmit power on all APs
B. moving to a bridging model
C. AP footprint
D. cell overlap would decrease
E. triangulation of devices 

Show Answer

Question # 7

An engineer has configured the wireless controller to authenticate clients on the employee SSID against Microsoft Active Directory using PEAP authentication. Which protocol does the controller use to communicate with the authentication server?

A. EAP 
B. 802.1X
C. RADIUS
D. WPA2

Show Answer

Question # 8

A customer requires wireless traffic from the branch to be routed through the firewall at corporate headquarters. A RADIUS server is in each branch location. Which Cisco FlexConnect configuration must be used? 

A. central authentication and local switching
B. central authentication and central switching
C. local authentication and local switching 
D. local authentication and central switching

Show Answer

Question # 9

An engineer is configuring multicast for two WLCs. The controllers are in different physical locations and each handles around 500 wireless clients. How should the CAPWAP multicast group address be assigned during configuration? 

A. Each WLC must be assigned a unique multicast group address.
B. Each WLC management address must be in the same multicast group. 
C. Both WLCs must be assigned the same multicast group address.
D. Each WLC management address must be in a different multicast group.

Show Answer

Question # 10

A controller shows that an AP in your environment is detecting interference, but the AP health score in Cisco DNA Center is unaffected. What are two reasons that Cisco DNA Center is ignoring the interference? (Choose two.)

A. The interference is less than or equal to 30% on the 2.4 GHz radio
B. The interference is less than or equal to 50% on the 2.4 GHz radio. 
C. Cisco DNA Center includes only Cisco CleanAir interferers in the AP health score. 
D. The interference is less than or equal to 30% on the 5 GHz radio.
E. Cisco DNA Center does not include interference in the AP health score.

Show Answer

Question # 11

An IT administrator is managing a wireless network in which most devices are Apple iOS. A QoS issue must be addressed on the WLANs. Which configuration must be performed?

A. Enable Fastlane globally under Wireless > Access Points > Global Configuration.
B. Create a new AVC Profile named AUTOQOS-AVC-PROFILE and apply to all WLANs. 
C. Enable Fastlane under each WLAN setting.  
D. Enable WMM TSPEC/TCLAS negotiation under Wireless > Advanced.  

Show Answer

Question # 12

An engineer added more APs to newly renovated areas in building. The engineer is now receiving Out-of-Sync alarms on Cisco Prime Infrastructure. Which two actions resolve this issue? (Choose two.) 

A. Manually synchronize from Cisco Prime Infrastructure. 
B. Manually synchronize from MSE.
C. Enable automatic synchronization on Cisco Prime Infrastructure. 
D. Enable automatic synchronization on MSE. 
E. Add new APs to maps on Cisco Prime Infrastructure. 

Show Answer

Question # 13

An engineer has many different WLANs on a WLC but does not want to broadcast them to every AP in the building. Which group must be configured on the WLC to allow different WLANs on the different APs without creating new interfaces?

A. ACL
B. interface group
C. mobility group
D. AP group

Show Answer

Question # 14

A network engineer must segregate all IPads on the guest WLAN to a separate VLAN. Howdoes the engineer accomplish this task without using Cisco ISE?

A. Create a local policy on the WLC. 
B. Use 802.1x authentication to profile the devices.
C. Use an mDNS profile for the iPad device.
D. Enable RADIUS DHCP profiling on the WLAN. 

Show Answer

Question # 15

A network is set up to support wired and wireless clients. Both types must authenticate using 802.1X before connecting to the network. Different types of client authentication must be separated on a Cisco ISE deployment. Which two configuration items achieve this task? (Choose two.) 

A. device profiles
B. policy sets 
C. separate networks
D. policy groups 
E. policy results 

Show Answer

Question # 16

An engineer has configured Media Stream on the WLC and must guarantee at least 2 Mbps stream per user. Which RRC template should the engineer use? 

A. coarse
B. medium
C. low 
D. ordinary 

Show Answer

Question # 17

A Cisco 8540 WLC manages Cisco Aironet 4800 Series Aps and send AoA data to a Cisco CMX 3375 Appliance for Hyperlocation. The load from the WLC is distributed to another virtual CMX server using CMX grouping. The virtual CMX server shows location RSSI data and not Hyperlocation. No AoA metrics are shown on the metrics page of the CMX virtual appliance under System > Metrics > Location Metrics. How must the network administrator resolve this issue?

A. Enable Wireless > Access Points > Global configuration > Enable Hyperlocation on the WLC.
B. Enable the HALO module on the CMX appliance for the data collection.
C. Allow port 2003 for AoA packets to flow through between the CMX appliances.
D. Use one Hyperlocation-enabled WLC and CMX for AoA data. 

Show Answer

Question # 18

An engineer must configure MSE to provide guests access using social media authentication. Which service does the engineer configure so that guests use Facebook credentials to authenticate?

A. Social Connect 
B. Client Connect 
C. Visitor Connect
D. Guest Connect

Show Answer

Question # 19

A company is collecting the requirements for an on-premises event. During the event, a wireless client connected to a dedicated WLAN will run a video application that will need on average 391595179 bits per second to function properly. What is the QoS marking that needs to be applied to that WLAN? 

A. Platinum
B. Gold
C. Silver
D. Bronze 

Show Answer

Question # 20

Which condition introduce security risk to a BYOD policy?

A. enterprise-managed MDM platform used for personal devices
B. access to LAN without implementing MDM solution
C. enforcement of BYOD access to internet only network
D. enterprise life-cycle enforcement of personal device refresh

Show Answer

Question # 21

An engineer is in the process of implementing Fastiane on a wireless network with a Mobility Express AP installed and Apple end-user devices. Due to a security concern, the IT department has updated all the iPads to version 14.5.423551943. Which QoS profile must the engineer configure on the user WLAN? 

A. Platinum 
B. Best Effort
C. Bronze
D. Silver

Show Answer

Question # 22

The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue?

A. Disable Cisco Hyperlocation, change the Cisco Hyperlocation detection threshold, and then enable it.
B. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WLAN. 
C. Place the APs to monitor mode, shutdown the radios, and then change the Cisco Hyperlocation detection threshold.
D. Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again. 

Show Answer