Cisco 300-415 Exam Dumps

Cisco 300-415 Sample Question Answers

Question # 1

In a customer retail network with multiple data centers, what does the network administrator use to create a regional hub topology?

A. control policy on vManage 
B. control policy on vSmart 
C. data policy on vSmart 
D. app route policy on vSmart 

Show Answer

Question # 2

Which component of the Cisco SD-WAN secure extensible network provides a single pane of glass approach to network monitoring and configuration?

A. APIC-EM 
B. vSmart
 C. vManage 
D. vBond 

Show Answer

Question # 3

What is the minimum Red Hat Enterprise Linux operating system requirement for a Cisco SD-WAN controller deployment via KVM? 

A. RHEL7.5 
B. RHEL 6.5 
C. RHEL4.4 
D. RHEL 6.7 

Show Answer

Question # 4

Which two metrics must a cloud Edge router use to pick the optimal path for a SaaS application reachable via a gateway site? (Choose two.) 

A. HTTP loss and latency metrics to the SaaS application 
B. ICMP loss and latency metrics to the SaaS application
C. BFD loss and latency metrics to the gateway site 
D. BFD loss and latency metrics to the SaaS application 
E. HTTP loss and latency metrics to the gateway site

Show Answer

Question # 5

An engineer is configuring a data policy for IPv4 prefixes for a single WAN Edge device on a site with multiple WAN Edge devices How is this policy added using the policy configuration wizard?

A. ln vManage NMS, select the configure policies screen, select the localized policy tab and click add policy 
B. In vSmart controller, select the configure policies screen, select the localized policy tab. and click add policy 
C. In vManage NMS. select the configure policies screen select the centralized policy tab and click add policy 
D. In vBond orchestrator. select the configure policies screen, select the localized policy tab. and click add policy 

Show Answer

Question # 6

WAN Edge routers are configured manually to use UDP port offset to use nondefault offset values when IPsec tunnels are created. What is the offse range?

A. 1-19
 B. 0-18 
C. 0-19 
D. 1-18

Show Answer

Question # 7

Which plane builds and maintains the network topology and makes decisions on traffic flows?

A. orchestration 
B. management 
C. control 
D. data 

Show Answer

Question # 8

Which protocol is configured on tunnels by default to detect loss, latency, jitter, and path failures in Cisco SD-WAN? 

A. TLS 
B. BFD 
C. OMP 
D. BGP 

Show Answer

Question # 9

Which policy tracks path characteristics such as loss, latency, and jitter in vManage?

A. VPN 
B. control 
C. app-route 
D. data 

Show Answer

Question # 10

What is the procedure to upgrade all Cisco SD-WAN devices to a recent version?

A. The upgrade is performed for a group of WAN Edge devices first to ensure data-plabe availability when other controllers are updated. 
B. The upgrade is performed first on vManage, then on WAN Edge devices, then on vBond and finally on vSmart The reboot must start from WAN Edge devices. 
C. Upgrade and reboot are performed first on vManage then on vBond then on vSmart. and finally on the Cisco WAN Edge devices. 
D. Upgrade and reboot are performed first on vBond. then on vSmart. and finally on the Cisco WAN Edge devices. 

Show Answer

Question # 11

Which command on a WAN Edge device displays the information about the colors presentin the fabric that are learned from vSmart via OMP?

A. show omp tlocs 
B. show omp sessions 
C. show omp peers 
D. show omp route 

Show Answer

Question # 12

A vEdge platform is sending VRRP advertisement messages every 10 seconds. Whichvalue configures the router back to the default timer?

A. 2 seconds 
B. 3 seconds 
C. 1 second 
D. 5 seconds 

Show Answer

Question # 13

Where on vManage does an engineer find the details of control node failure?

A. Alarms 
B. Events 
C. Audit log 
D. Network 

Show Answer

Question # 14

An engineer is troubleshooting a certificate issue on vEdge. Which command is used toverify the validity of the certificates?

A. show control local-properties 
B. show control summary 
C. show certificate installed 
D. show certificate status 

Show Answer

Question # 15

What are the two advantages of deploying cloud-based Cisco SD-WAN controllers?(Choose two.)

A. centralized control and data plane 
B. distributed authentication policies 
C. management of SLA 
D. infrastructure as a service 
E. centralized raid storage of data 

Show Answer

Question # 16

An administrator needs to configure SD-WAN to divert traffic from the company's privatenetwork to an ISP network. What action should be taken to accomplish this goal?

A. configure the control policy 
B. configure the data policy 
C. configure the data security policy 
D. configure the application aware policy 

Show Answer

Question # 17

How is multicast routing enabled on devices in the Cisco SD-WAN overlay network?

A. The WAN Edge routers originate multicast service routes to the vSmart controller viaOMP, which then forwards joins for requested multicast groups based on IGMP v1 or v2toward the source or PIM-RP as specified m the original PIM join message. 
B. The vSmart controller originates multicast service routes to the WAN Edge routers viaOMP, which then forwards joins for requested multicast groups cased on IGMP v1 or v2toward the source or PlM-RP as specified m the original PIM join message 
C. The vSmart controller originates multicast service routes to the WAN Edge routers viaOMP, which then forwards joins (or requested multicast groups based on IGMP v2 or v3toward the source or PIM-RP as specified in the original PIM join message 
D. The WAN Edge routers originate multicast service routes to the vSmart controller viaOMP. which then forwards joins for requested multicast groups based on iGMP v2 or v3toward the source or PIM-RP as specified in the original PIM join message 

Show Answer

Question # 18

Which protocol is used for the vManage to connect to the vSmart Controller hosted inCloud?

A. PnP Server 
B. ZTP 
C. NETCONF 
D. HTTP 

Show Answer

Question # 19

When software is upgraded on a vManage NMS, which two image-adding options storeimages in a local vManage software repository? (Choose two.

A. To be downloaded over a SMTP connection 
B. To be downloaded over a SNMP connection 
C. To be downloaded over an out-of-band connection 
D. To be downloaded over a control plane connection 
E. To be downloaded over an ICMP connection 

Show Answer

Question # 20

A policy is created to influence routing path in the network using a group of prefixes. Whatpolicy application will achieve this goal when applied to a site List?

A. vpn-membership policy 
B. cflowd-template 
C. app-route policy 
D. control-policy 

Show Answer

Question # 21

When redistribution is configured between OMP and BGP at two Data Center sites thathave Direct Connection interlink, which step avoids learning the same routes on WANEdge routers of the DCs from LAN?

A. Define different VRFs on both DCs 
B. Set same overlay AS on both DC WAN Edge routers 
C. Set down-bit on Edge routers on DC1 
D. Set OMP admin distance lower than BGP admin distance 

Show Answer

Question # 22

Which port is used for vBond under controller certificates if no alternate port is configured?

A. 12345 
B. 12347 
C. 12346 
D. 12344 

Show Answer

Question # 23

For data plane resiliency, what does the Cisco SD-WAN software implement?

A. BFD 
B. establishing affinity between vSmart controllers and WAN Edge routers 
C. multiple vBond orchestrators 
D. OMP 

Show Answer

Question # 24

Which policy blocks TLOCs from remotes and allows TLOCs from the data center to formhub-and-spoke peering?

A. localized control policy 
B. localized data policy 
C. centralized data policy 
D. centralized control policy 

Show Answer

Question # 25

What is a benefit of the application-aware firewall?

A. It blocks traffic by MAC address 
B. It blocks traffic by MTU of the packet. 
C. It blocks traffic by application. 
D. It blocks encrypted traffic 

Show Answer

Question # 26

A customer must upgrade the cisco SD-WAN devices and controllers from version 19.2 toversion 20.3. The devices include WAN Edge cloud, vManage, vSmart, and vBond. Whichtypes of image types of image files are needed for this upgrade?

A. one file for vManage and one file for all other devices with extension tar.gz 
B. one file for vManage, one for vSmart and one for vBond + WAN Edge Cloud withextension.bin 
C. one file for vManaga, one for vSmart and one for vBond + WAN Edge Cloud withextension tar.gz 
D. one file for vManaga and one file for all other devices with extension .bin 

Show Answer

Question # 27

Which feature builds transport redundancy by using the cross link between two redundantWAN Edge routers?

A. OMP 
B. zero-touch provisioning 
C. quality of service 
D. TLOC extension 

Show Answer

Question # 28

A network administrator is configuring an application-aware firewall between inside zonesto an outside zone on a WAN edge router using vManage GUI. What kind of Inspection isperformed when the ‘’inspect’’ action is used?

A. stateful inspection for TCP and UDP 
B. stateful inspection for TCP and stateless inspection of UDP 
C. IPS inspection for TCP and-Layer 4 inspection for UDP 
D. Layer 7 inspection for TCP and Layer 4 inspection for UDP 

Show Answer

Question # 29

An engineer wants to automate the onboarding process for a WAN Edge router withvManage. Which command will accomplish this?

A. request vedge-cloud activate chassis-number <chassis-number> serial <serial> 
B. request vedge-cloud activate chassis-number <chassis-number> token <token-number> 
C. request vedge-cloud activate serial <serial> token <token-number> 
D. request vedge-cloud activate chassis-number <chassis-number> organization<organization> 

Show Answer

Question # 30

When a WAN Edge device joins the SD-WAN overlay, which Cisco SD-WAN componentsorchestrates the connection between the WAN Edge device and a vSmart controller?

A. vManage 
B. vBond 
C. OMP 
D. APIC-EM 

Show Answer

Question # 31

Which protocol is used to measure loss latency, Jitter, and liveliness of the tunnel betweenWAN Edge router peers?

A. OMP 
B. IP SLA 
C. NetFlow 
D. BFD 

Show Answer

Question # 32

Which component is responsible for routing protocols such as BGP and OSPF in a CiscoSD-WAN solution?

A. vSmart Controller 
B. vBond Orchestrator 
C. vManage 
D. WAN Edge Router 

Show Answer

Question # 33

On which device is a service FW address configured to Insert firewall service at the hub?

A. vEdge at the branch 
B. vSmart at the hub 
C. vEdge at the hub 
D. vSmart at the branch 

Show Answer

Question # 34

What is a description of vManage NMS?

A. It is accessible only from VPN 512 (the management VPN). 
B. A cluster requires device templates to be created on and attached to the same server 
C. It is a software process on a dedicated WAN Edge router in the network. 
D. A cluster consists of a minimum of two vManage NMSs 

Show Answer

Question # 35

A network administrator is creating an OMP feature template from the vManage GUI to beapplied to WAN edge routers. Which configuration attribute will avoid the redistribution ofthe routes back into the OMP from the LAN side?

A. configure "Number of Paths Advertised per Prefix" 
B. configure "Overlay AS Number" 
C. configure "Send Backup Paths" 
D. configure "ECMP limit" 

Show Answer

Question # 36

If Smart Account Sync is not used, which Cisco SD-WAN component is used to upload anauthorized serial number file?

A. WAN Edge 
B. vManage 
C. vSmart 
D. vBond 

Show Answer